Specifications
₹4,453.32
Inc. GST
The Sartorius Vacuum Tube For MultiStation is silicone tubing designed for use with the stand MultiStation for vacuum filtration. This tube supports reliable vacuum filtration workflows in laboratory applications where compatible Sartorius MultiStation accessories are required.
This Sartorius vacuum tube is a practical accessory for laboratories using the MultiStation for dependable vacuum filtration setup and operation.
The Vacuum tube is designed for vacuum filtration. This vacuum tube format supports routine laboratory work in that application.
The Vacuum tube is a vacuum tube intended for vacuum filtration. The product format and intended use are the main selection points for this item.
Yes. The Vacuum tube is suitable for vacuum filtration. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement. Where chemicals or solvents are involved, confirm that the product material is suitable for the specific substance and conditions before use.
The Vacuum tube is made from Silicone tubing. Material is an important selection factor for durability and application suitability.
The Vacuum tube is designed for vacuum filtration. This vacuum tube format supports routine laboratory work in that application.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
₹4,453.32
Inc. GST
