The 2mag Lid mixBATH for MIXdrive 6 is a practical cover accessory designed for use with the mixBATH in combination with the 2mag MIXdrive 6 stirring system. Made from chemically resistant, transparent polycarbonate, this lid helps minimise evaporation effects during laboratory processes while supporting clear visibility of the bath contents. It also includes cut-outs for the correct positioning of a thermostat, making it a useful addition for controlled bath applications.
The 2mag Lid mixBATH for MIXdrive 6 is a useful accessory for laboratories seeking a simple and effective way to reduce evaporation and support controlled bath operation. Its transparent polycarbonate construction and thermostat-compatible design make it well suited to bath-based stirring applications where visibility, chemical resistance, and practical handling are important.
Manufacturer P/N
40806
Part Number
7.639 439
Manufacturer
2mag
Description
mixBATHcover 6, PP, for mixBath in combination with MIXdrive 6
Manufacturer P/N
40850
Part Number
6.286 233
Manufacturer
2mag
Description
mixBATH PC, fits for MIXdrive 6/15/60 to 50 °C
Manufacturer P/N
40815
Part Number
6.255 612
Manufacturer
2mag
Description
mixBATHcover 15, PP, for mixBath in combination with MIXdrive 15
Manufacturer P/N
49004
Part Number
9.645 972
Manufacturer
2mag
Description
distriBOX 4 (4-way header)
Manufacturer P/N
49008
Part Number
9.645 973
Manufacturer
2mag
Description
distriBOX 8 (8-way header)
₹160,188.54
Inc. GST
Manufacturer P/N
40950
Part Number
9.645 974
Manufacturer
2mag
Description
mixBATH (stainless steel bath, electropolished), fits for MIXdrive 6/15/60 (also HT)
It is a practical cover accessory designed for use with the mixBATH in combination with the 2mag MIXdrive 6 stirring system. Made from chemically resistant, transparent polycarbonate, this lid helps minimise evaporation effects during laboratory processes while supporting clear visibility of the bath contents. It also includes cut-outs for the correct positioning of a thermostat, making it a useful addition for controlled bath applications.
_0.png&w=3840&q=75)
7 mins read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
7 mins read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
9 mins read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
9 mins read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
6 mins read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
₹93,650.70
Inc. GST
