The Carl Bosshead Alu-Maxi, Ø 24 mm is designed for secure fixation of rods and attachments with larger diameters in laboratory setups. Made from powder-coated aluminium, this bosshead supports rods up to Ø 19 mm on one side and up to Ø 24 mm on the other side.
This Carl bosshead is suitable for users requiring a strong aluminium clamp for stable laboratory rod and attachment positioning.
The Alu-Maxi is designed for secure rod fixation in laboratory support setups. The stated format and features make the product suitable for routine laboratory work within that application.
The main specifications of the Alu-Maxi are that the rod compatibility is Suitable for rods and attachments up to Ø 19 mm and Ø 24 mm. These are the main selection points to compare with the requirements of the laboratory task.
Yes. The Alu-Maxi is suitable for secure rod fixation in laboratory support setups. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement.
The Alu-Maxi is made from Powder-coated aluminium. Material is an important selection factor for durability and application suitability.
The Alu-Maxi is designed for secure rod fixation in laboratory support setups. The stated format and features make the product suitable for routine laboratory work within that application.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
₹4,715.28
Inc. GST
