Testo Online Data Logger 162 IAQ with Display and Integrated Sensors for Temperature, Humidity, CO2 and Atmospheric Pressure

The Testo Online Data Logger 162 IAQ With Display and Integrated Sensors for Temperature, Humidity, CO₂ and Atmospheric Pressure is designed for automated indoor air quality monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection, where data loggers can be configured, limit value alarms can be set, and measurement data can be viewed and analysed.

Key Features:

• Brand: Testo
• Model: 162 IAQ
• Type: Online data logger
• Display: Large display for visual inspection on site
• Integrated Sensors: Temperature, humidity, CO₂, and atmospheric pressure
• Data Transmission: Via WLAN
• Cloud Documentation: Automatic measurement value documentation in testo Saveris Cloud
• Alerts: Email, SMS, or push notification via the testo Smart App when limit values are exceeded
• Memory: 32000 measured values
• Measuring Cycle: 5 min to 24 h in battery operation and 1 min to 24 h with power adapter
• Scope of Supply: Online data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol, and power adapter

Note: To operate the online data logger in the testo Saveris Cloud, a valid Data Monitoring Licence is required and is subject to a charge.

This Testo online data logger is suitable for automated monitoring of indoor air quality parameters, with cloud-based data access and app connectivity for viewing measurement values from an internet-enabled smartphone, tablet, or PC.

Frequently Asked Questions

1. What is the Testo Online Data Logger 162 IAQ With Display and Integrated Sensors for Temperature, Humidity, CO2 and Atmospheric Pressure used for?

The 162 IAQ is designed for automated indoor air quality monitoring. This online data logger format supports routine laboratory work in that application.

2. What are the main specifications of the 162 IAQ?

The main specifications of the 162 IAQ are that the integrated sensors is Temperature, humidity, CO 2, and atmospheric pressure, the memory is 32000 measured values and the measuring cycle is 5 min to 24 h in battery operation and 1 min to 24 h with power adapter. These are the main selection points to compare with the requirements of the laboratory task.

3. Is the 162 IAQ suitable for automated indoor air quality monitoring?

Yes. The 162 IAQ is suitable for automated indoor air quality monitoring. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement.

4. What type of display does the 162 IAQ use?

The 162 IAQ uses Large display for visual inspection on site. This is the display configuration provided for routine operation and reading of results.